# How to Connect AirPods and Bluetooth Devices With a Shortcut on Mac

URL: https://www.raycast.com/resources/how-to-connect-airpods-with-a-shortcut-on-mac
Published: 2026-11-16
Updated: 2026-11-16
Description: Connect your AirPods, headphones, keyboard or mouse without digging through menus. Three ways to do it on a Mac: Control Center, System Settings, and the free Toothpick extension for Raycast.

You sit down, put your AirPods in, and the sound keeps coming out of your Mac's speakers. So you open the menu bar, find Bluetooth, wait for the list, and click. Every. Single. Time.

**The short answer:** macOS has no built-in shortcut for this. Click your AirPods in **Control Center → Sound** or **Control Center → Bluetooth**, or install the free [Toothpick](https://www.raycast.com/VladCuciureanu/toothpick) extension for Raycast and give your AirPods their own hotkey.

Here's how each way works, and when it's worth using.

| Method                         | Best for                                  | Keyboard only | Works for any Bluetooth device |
| ------------------------------ | ----------------------------------------- | ------------- | ------------------------------ |
| Toothpick for Raycast          | Everyday switching, one hotkey per device | Yes           | Yes                            |
| Control Center or the menu bar | Quick clicks, checking battery            | No            | Yes                            |
| System Settings → Bluetooth    | Pairing new devices, fixing problems      | No            | Yes                            |

## Connect AirPods and Bluetooth devices with Raycast | The quickest way

### [Toothpick: connect any Bluetooth device from your keyboard](https://www.raycast.com/VladCuciureanu/toothpick)

Toothpick is a free, open-source extension with more than 60,000 installs. It puts all your Bluetooth devices into Raycast. Open it, pick a device, press Enter. That's it.

![Manage Bluetooth Connections lists connected devices first, with their battery levels.](https://www.raycast.com/uploads/how-to-connect-airpods-with-a-shortcut-on-mac/how-to-connect-airpods-with-a-shortcut-on-mac.png)

Open Raycast and run **Manage Bluetooth Connections**. You get every device your Mac knows about, connected ones on top. Press Enter on a device to **Connect** it, or to **Disconnect** it if it's already connected. Connected devices show their battery, and AirPods show the case, left and right bud separately when macOS reports them.

Press ⌘ K on a device for more:

- **Refresh** (⌘ R): disconnects the device, waits two seconds, and connects it again. Handy when your AirPods are connected but the audio sounds off.
- **Copy Device Name** and **Copy Mac Address**: useful for setting up the shortcuts below.

The real speedup is in the extra commands. They're turned off by default, so enable the ones you want in Raycast's settings under **Extensions → Toothpick**:

- **Connect Device**, **Disconnect Device**, **Toggle Device** and **Refresh Device**: type a device's name or MAC address as an argument, like `Toggle Device AirPods Pro`.
- **Connect, Disconnect, Toggle** and **Refresh Favorite Device #1, #2 and #3**: save up to three devices in the extension's preferences and run them with no typing at all.
- **Refresh All**: turns Bluetooth off and on again, for when everything is stuck.

> Pro tip: put your AirPods' exact name in **Favorite Device #1**, enable **Toggle Favorite Device #1**, and give it a [hotkey](https://manual.raycast.com/command-aliases-and-hotkeys) like ⌥ ⌘ A. One press connects your AirPods, the next one disconnects them.

Want Bluetooth off altogether? Raycast's built-in [System Commands](https://manual.raycast.com/system-commands) include **Toggle Bluetooth**, no extension needed.

A few things worth knowing:

- **Names have to match closely.** Toothpick compares names with a fuzzy match, and the **Device Name Fuzzy Ratio** preference defaults to 98 out of 100. "AirPods" won't match "Alex's AirPods Pro" until you lower it. The easy fix: use **Copy Device Name** and paste the exact name, or use the MAC address instead.
- **There are two Bluetooth backends.** Toothpick uses AppleScript by default, which works out of the box. If connections feel flaky, install `blueutil` with Homebrew (`brew install blueutil`) and switch **Bluetooth Backend** to **blueutil (Experimental)**. The README calls it faster and more stable, and it turns Bluetooth on before connecting if it's off.
- **Refresh All needs blueutil** on a Mac, even if you keep the AppleScript backend for everything else.

You can also just ask. In Raycast AI, type `@`, pick Toothpick and say “connect my headphones”. It finds the right device and connects it.

Toothpick works on Windows too, for headphones and speakers. Windows manages keyboards and mice itself, so they're listed but can't be connected from Toothpick there.

If your AirPods are connected but the sound still comes out of the wrong place, [Set Audio Device](https://www.raycast.com/benvp/audio-device) switches your output from Raycast as well.

Hotkeys and aliases work on almost any Raycast command, including this one. This three-minute video shows how to set them up:

[Video: Shortcuts in Raycast](https://www.youtube.com/watch?v=C0oOsjmXduY)

## Use Control Center or the menu bar | Built in: Control Center

The built-in way takes a few clicks, but it's always there.

1. Click the **Control Center** icon in the menu bar.
2. Click the arrow next to **Sound** and pick your AirPods, or click **Bluetooth** and pick any device.
3. Click the device again to disconnect it.

If you switch devices a lot, give Bluetooth its own menu bar icon. On macOS Tahoe, go to **System Settings → Menu Bar** and turn on **Bluetooth**. On macOS Sequoia, go to **System Settings → Control Center** and set **Bluetooth** to **Show in Menu Bar**. The menu also shows the battery of connected devices.

## Pair and fix devices | Built in: System Settings

System Settings is where you pair new devices, and where you go when something won't connect.

1. Open **System Settings → Bluetooth** and make sure Bluetooth is on.
2. Put your AirPods in their case, open the lid, and put them in pairing mode: press and hold the button on the back of the case, or double-tap the front of the case on newer models without a button, until the light flashes white.
3. Under **Nearby Devices**, click **Connect** next to your AirPods.

If your AirPods jump to your Mac every time you use them nearby, click your AirPods' name in the System Settings sidebar while they're connected, and set **Connect to This Mac** to **When Last Connected to This Mac**. On newer macOS versions you'll find it under **Audio & Routing**.

## Frequently Asked Questions

### Is there a keyboard shortcut to connect AirPods to a Mac?

macOS doesn't have one built in. The free Toothpick extension for Raycast adds commands like **Connect Favorite Device #1** and **Toggle Favorite Device #1** that you can give any hotkey, so one key press connects your AirPods.

### Why are my AirPods not connecting to my Mac?

Check that Bluetooth is on and the AirPods are charged, then try connecting again from Control Center. If that fails, forget them in **System Settings → Bluetooth** and pair them again by putting them in pairing mode.

### How do I stop my AirPods from switching to my Mac automatically?

While they're connected, open **System Settings**, click your AirPods' name in the sidebar, and set **Connect to This Mac** to **When Last Connected to This Mac**. On newer macOS versions this option sits under **Audio & Routing**.

### How do I show Bluetooth in the Mac menu bar?

On macOS Tahoe, go to **System Settings → Menu Bar** and turn on **Bluetooth**. On macOS Sequoia and earlier, go to **System Settings → Control Center** and set **Bluetooth** to **Show in Menu Bar**.

### How do I check my AirPods battery on a Mac?

Open the Bluetooth menu in the menu bar or Control Center while they're connected. Toothpick for Raycast also shows the battery of each connected device, with separate levels for the case, left and right AirPod when macOS reports them.
