# How to Switch Audio Output on Mac With a Shortcut

URL: https://www.raycast.com/guides/how-to-switch-audio-output-on-mac
Published: 2026-11-16
Updated: 2026-11-16
Description: Jump between AirPods, speakers and your display without digging through menus. Three ways to change your Mac's sound output: the menu bar, System Settings, and the free Set Audio Device extension.

You sit down for a call, put your AirPods in, and the meeting still blasts out of your laptop speakers. Sound familiar? Your Mac picks an output device for you, and it doesn't always pick the right one.

**The short answer:** click the **Sound** icon in the menu bar (or open **Control Center**) and pick a device under **Output**. You can also go to **System Settings → Sound → Output**. For a real keyboard shortcut, install the free [Set Audio Device](https://www.raycast.com/benvp/audio-device) extension for Raycast and run **Set Output Device**.

Here's how each one works, and which to use when.

| Method                       | Best for                               | Keyboard only | Keeps your choice          |
| ---------------------------- | -------------------------------------- | ------------- | -------------------------- |
| Set Audio Device for Raycast | Switching often, one hotkey per device | Yes           | Yes, with a default device |
| Sound menu / Control Center  | Quick one-off switch with the mouse    | No            | No                         |
| System Settings              | Balance, alert sounds, all the details | No            | No                         |

## Switch audio output with Raycast | The quickest way

### [Set Audio Device: switch speakers and headphones from your keyboard](https://www.raycast.com/benvp/audio-device)

Set Audio Device is a free, open-source extension with more than 80,000 installs. It lists every input and output device on your Mac and switches between them with Enter. It also works on Windows.

Open Raycast and type **Set Output Device**:

![Set Output Device shows every device, its volume, and a checkmark next to the one that's playing.](https://www.raycast.com/uploads/how-to-switch-audio-output-on-mac/how-to-switch-audio-output-on-mac.png)

The device that's playing right now sits at the top with a green icon and a checkmark. Each row shows its connection type and current volume, so you can tell your Studio Display from your MacBook speakers at a glance. Press Enter and sound moves over. The window stays open, so you can keep going.

The commands you'll use most:

- **Set Output Device**: pick the device sound plays through.
- **Set Input Device**: pick your microphone.
- **Set Output Volume** and **Set Input Volume**: type an exact level from 0 to 100.
- **Toggle Favourites**: flip between two favourite outputs, like AirPods and speakers.
- **Use Combo 1, 2 and 3**: switch your microphone and output together, like a "Meeting" setup and a "Desk" setup.

Toggle Favourites and the Combo commands are off by default. Turn them on in **Raycast Settings → Extensions → Set Audio Device**, then type your device names exactly as they appear in the list.

> Pro tip: select a device and open the Action Panel with ⌘ K, then choose **Create Quicklink**. You get a "Set Output Device to AirPods Pro" [Quicklink](https://manual.raycast.com/quicklinks) you can give its own hotkey or alias, like `pods`. One keystroke per device, no list at all.

A few more things the device list can do, all from the Action Panel:

- **Set as Default Device** (⌘ ⇧ D): if macOS switches away after sleep, a Bluetooth reconnect or plugging in a monitor, the background **Enforce Output Device** command switches back, roughly once a minute. Switch by hand and it gives you a one-minute grace period first.
- **Pin Volume** (⌘ ⇧ V): locks a device's volume. If macOS resets it, the extension puts it back. Changes under 2% are ignored, so small adjustments don't trigger a reset.
- **Mute** (⌘ M) a device without switching to it, and **Hide Device** to clean up virtual devices you never use.

By default, macOS plays alerts and system sounds through their own device. Turn on **Play sound effects through current output** in the extension's preferences and those beeps follow you to your headphones too.

You can also just ask. Set Audio Device comes with AI tools, so in [Raycast AI](https://manual.raycast.com/ai/ai-extensions) you can mention the extension and say "switch my output to the Studio Display and set the volume to 40%".

Hotkeys and aliases work on almost any Raycast command, including this one. This three-minute video shows how to set them up:

[Video: Shortcuts in Raycast](https://www.youtube.com/watch?v=C0oOsjmXduY)

## Use the Sound menu | Built in: Menu bar and Control Center

The fastest built-in way is one click away, if the Sound icon is in your menu bar.

1. Click the **Sound** icon in the menu bar.
2. Choose a device under **Output**, like your AirPods or **MacBook Pro Speakers**.

Hold Option while you click the Sound icon to see your input devices as well, so you can switch your microphone from the same menu.

No Sound icon? Open **Control Center** from the menu bar, click **Sound** to expand it, and pick your device there. To keep the icon in the menu bar for good, go to **System Settings → Menu Bar** and turn on **Sound** (on macOS Sequoia and earlier, it's **System Settings → Control Center → Sound**).

AirPods also show up in the **Bluetooth** menu, and connecting them from there usually switches your output to them.

## Change it in System Settings | Built in: System Settings

System Settings is slower, but it shows everything in one place.

1. Open **System Settings → Sound**.
2. Under **Output & Input**, click **Output**.
3. Select the device you want. Use the **Output volume** and **Balance** sliders to fine-tune it.

Further up, under **Sound Effects**, the **Play sound effects through** menu decides where alerts go. It's separate from your main output, which is why a notification can ding on your speakers while music plays in your headphones.

> Pro tip: hold Option and press any volume key to jump straight to Sound settings.

## Frequently Asked Questions

### Is there a keyboard shortcut to change audio output on Mac?

macOS has no built-in shortcut that switches the output device. Option plus a volume key opens Sound settings, which gets you close. For a real one-key switch, use [Set Audio Device](https://www.raycast.com/benvp/audio-device) and give **Toggle Favourites** or a device Quicklink a hotkey.

### How do I switch between AirPods and speakers on Mac?

Click the Sound icon in the menu bar and choose your AirPods or speakers under **Output**. With Raycast, set both as favourites in Set Audio Device and run **Toggle Favourites** to flip between them.

### Why does my Mac keep switching audio output?

macOS moves sound to newly connected devices, so AirPods reconnecting, waking from sleep, or plugging in a monitor can change your output. Set Audio Device can set a default device and switch back to it automatically about once a minute.

### How do I show the Sound icon in the menu bar on Mac?

On macOS Tahoe, go to **System Settings → Menu Bar** and turn on **Sound**. On macOS Sequoia and earlier, go to **System Settings → Control Center** and set **Sound** to always show in the menu bar.

### Why can't I change the volume of my HDMI monitor on Mac?

Many HDMI and DisplayPort displays don't let macOS control their volume, so you have to use the monitor's own buttons. Set Audio Device labels these devices with **Volume controlled by device**.
