# How to Check CPU and Memory Usage on Mac

URL: https://www.raycast.com/guides/how-to-check-cpu-and-memory-usage-on-mac
Published: 2026-11-16
Updated: 2026-11-16
Description: Find out what's slowing your Mac down. Check CPU and memory usage with Activity Monitor, a few Terminal commands, or the free System Monitor extension for Raycast.

Fans spinning up, beachballs, a laptop that's suddenly warm on your lap. Something is eating your Mac's CPU or memory, and you want to know what.

**The short answer:** open **Activity Monitor** (Applications → Utilities) and check the **CPU** and **Memory** tabs, or run `top -o cpu` in Terminal. For a faster look, install the free [System Monitor](https://www.raycast.com/hossammourad/raycast-system-monitor) extension for Raycast and run **System Monitor**.

Here's how each one works, and what the numbers actually mean.

| Method                        | Best for                    | Shows memory pressure  | Lives in the menu bar |
| ----------------------------- | --------------------------- | ---------------------- | --------------------- |
| System Monitor for Raycast    | Quick checks, one keystroke | Yes                    | Yes                   |
| Activity Monitor              | The full process list       | Yes, as a graph        | Dock icon only        |
| `top` and friends in Terminal | Scripts, SSH sessions       | With `memory_pressure` | No                    |

## Check CPU and memory usage with Raycast | The quickest way

### [System Monitor: your Mac's vitals in one window](https://www.raycast.com/hossammourad/raycast-system-monitor)

System Monitor is a free, open-source extension with more than 125,000 installs. It puts CPU, memory, disk, power and network in a single list. Select a row and the detail pane fills with the numbers you'd otherwise dig through Activity Monitor for.

![System Monitor's Memory pane: usage, memory pressure and the three apps using the most RAM.](https://www.raycast.com/uploads/how-to-check-cpu-and-memory-usage-on-mac/how-to-check-cpu-and-memory-usage-on-mac.png)

It comes with two commands:

- **System Monitor**: a live view of your Mac. **CPU** shows overall usage, the top three processes, per-core load, temperature, fan speed, load averages and uptime. **Memory** shows used and free RAM, memory pressure, the top three processes, and the breakdown into active, inactive, wired, compressed, purgeable and swap.
- **Menubar System Monitor**: the same stats in a menu bar dropdown. Click CPU, memory, battery or any other stat in the menu to pin it next to the icon, so you can keep an eye on it all day.

When you need more than the top three, press Enter on CPU or Memory to **Open Activity Monitor**. It jumps straight to the matching tab, so selecting Memory takes you to Activity Monitor's Memory tab.

> Pro tip: give **System Monitor** a [hotkey](https://manual.raycast.com/command-aliases-and-hotkeys) or an alias like `sm` in Raycast's settings. Set **Default View** to Memory or CPU in the extension's preferences and it opens right on the pane you care about.

A few details worth knowing:

- **The memory color follows memory pressure, not the percentage.** Apple Silicon Macs often sit at 75 to 85% used while everything's fine, so the tag stays green as long as macOS reports pressure as Normal.
- **Used or free, your call.** Each of CPU, memory, disk and battery can show what's used or what's left. Change it in the extension's preferences.
- **You can format the menu bar text.** Tags like `<PERCENT>`, `<VALUE>` and `<TOTAL>` in the Menubar System Monitor preferences decide whether memory reads as a percentage, gigabytes, or both.

You can also just ask. In [Raycast AI](https://manual.raycast.com/ai/ai-extensions), type `@`, pick System Monitor and ask “is my Mac running low on memory?” It reads your current CPU, memory, disk and battery status. It doesn't send your process list, serial number or hostname.

If you find the culprit, the free [Kill Process](https://www.raycast.com/rolandleth/kill-process) extension lists every process sorted by CPU or memory usage and quits it from Raycast, force quit included. To stop apps you forgot about from eating memory in the first place, turn on [Auto Quit](https://manual.raycast.com/auto-quit): Raycast quits the apps you pick after they've sat unused for a while.

## Use Activity Monitor | Built in: Applications → Utilities

Activity Monitor is the Mac's own task manager. It shows every process, not just the top few.

1. Open **Activity Monitor** from **Applications → Utilities**.
2. Click the **CPU** tab, then click the **% CPU** column to sort by the heaviest processes.
3. Click the **Memory** tab and sort by **Memory**.

At the bottom of the CPU tab you'll see **System**, **User** and **Idle**: how much of the chip macOS is using, how much your apps are using, and how much is free. At the bottom of the Memory tab you'll find **Physical Memory**, **Memory Used**, **App Memory**, **Wired Memory**, **Compressed**, **Cached Files** and **Swap Used**.

The number to watch is the **Memory Pressure** graph. Green means your Mac is handling things fine. Yellow means it's compressing memory to keep up. Red means it's swapping to disk, and that's when everything starts feeling slow.

Two handy extras:

- **Window → CPU Usage** and **Window → CPU History** open small windows that show the load per core.
- **View → Dock Icon** turns Activity Monitor's Dock icon into a live CPU meter.

> Pro tip: a single process can show more than 100% CPU. Activity Monitor counts per core, so an app using two full cores reads 200%. Check Idle at the bottom for the whole picture.

## Use top, vm_stat and memory_pressure | Built in: Terminal

If you live in Terminal, or you're connected to a Mac over SSH, these commands come with macOS.

1. Open **Terminal** (Applications → Utilities).
2. Run `top -o cpu` to list processes by CPU usage, or `top -o mem` to sort by memory.
3. Press `q` to quit.

The header of `top` shows the overall CPU split and a `PhysMem` line with used and unused memory. A few more commands:

- `top -l 1 -o cpu | head -20`: print one snapshot and exit, handy for scripts.
- `memory_pressure`: prints memory stats and ends with **System-wide memory free percentage**. Run it with no flags. Options like `-l` and `-p` deliberately put your Mac under memory pressure to test apps.
- `vm_stat`: shows memory in pages, not bytes. The first line tells you the page size: 16,384 bytes on Apple silicon, 4,096 on Intel. Multiply to get bytes.

## New to Raycast?

Here's a quick tour of what else it can do, in under seven minutes:

[Video: 102 Things You Can Do With Raycast 2.0](https://www.youtube.com/watch?v=G7_7F_FBqQE)

## Frequently Asked Questions

### How do I check my CPU usage on a Mac?

Open **Activity Monitor** from **Applications → Utilities** and click the **CPU** tab, or run `top -o cpu` in Terminal. With Raycast, run **System Monitor** and select **CPU** to see usage, the top processes, per-core load and temperature.

### How do I see how much RAM my Mac is using?

Open Activity Monitor and click the **Memory** tab. **Memory Used** and the **Memory Pressure** graph at the bottom tell you how much RAM is in use and whether it's a problem.

### Is high memory usage bad on a Mac?

Not on its own. macOS uses spare RAM for caching and compression, so a high percentage is normal. Watch memory pressure instead: as long as it's green, or Normal, your Mac has enough memory.

### Why is my Mac's CPU usage over 100%?

Activity Monitor and `top` measure CPU per core, so a process using two cores fully shows 200%. The **System**, **User** and **Idle** numbers at the bottom of the CPU tab show the load across the whole chip.

### Is there a free Activity Monitor alternative for Mac?

[System Monitor](https://www.raycast.com/hossammourad/raycast-system-monitor) is a free, open-source extension for Raycast. It shows CPU, memory, disk, power and network in one window and in your menu bar, and it can open Activity Monitor on the right tab when you need the full process list.

### How do I stop an app that's using too much CPU or memory?

In Activity Monitor, select the process, click the **Stop** button in the toolbar, then choose **Quit** or **Force Quit**. In Raycast, the free [Kill Process](https://www.raycast.com/rolandleth/kill-process) extension lists processes by CPU or memory usage and quits the one you pick.
